ra_t16 - convert RADIANCE picture to/from Targa 16 or 24-bit image file
ra_t16 [
-2 ][ -3 ][ -g gamma
][ -e +/-stops ] [ input [ output
] ]
ra_t16 -r [ -g gamma ][ -e
+/-stops ] [ input [ output ] ]
Ra_t16 converts between RADIANCE and Targa 16-bit or 24-bit RGB image files (type 2 in Targa’s documentation). In the default mode, a RADIANCE picture is converted to an RGB file of the same horizontal and vertical dimensions with 16-bits per pixel. The -3 option tells the program to produce a 24-bit image file instead. The -g option specifies the exponent used in gamma correction; the default value is 2.2. An exponent of 1.0 turns gamma correction off. The -e option specifies an exposure compensation in f-stops (powers of two). Only integer stops are allowed, for efficiency. The -r option invokes a reverse conversion, from a 16-bit or 24-bit Targa file to a RADIANCE picture. The determination of depth is made automatically on reverse translation, so the -2 and -3 options are not necessary. If the output file is missing, the standard output is used.
Greg Ward
Run-length encoded files can be read but not written with this program.
pfilt(1), ra_bmp(1), ra_bn(1), ra_ppm(1), ra_pr(1), ra_pr24(1), ra_t8(1), ra_tiff(1), ximage(1)